Torquing the case bolts. |
Bare Engine case with studs installed. |
Crankshaft with piston and cylinders1. |
Crankshaft with piston and cylinders 2. |
Crankshaft with piston and cylinders3. |
Crankshaft part with Porsche stamp. |
Crankshaft serial with mfg. stamp. |
Set of titanimun rods bearings ready for instalation.JPG |
Main oil pump ready to install. |
24 mm tatanimum drive shaft ready to install. |
Titaninum dist. fan drive shaft ready to install. |
Case with crankshaft oil pumpand driveshaft installed. |
Installing the upper fan and distributer drive shaft. |
Case with dist. shaftdrive shaft and fan drive installed. |
Case halfs together to check all the gearlashes. |
Torquing the rod bolts. |
Instaling the crankshaft with rods. |
Crank installed 1. |
Crank installed 3. |
Crank installed 2. |
Checking things out. |
Instaling the upper shaft |
Case ready to close 1 |
Case ready to close 2 |
Close up pf crank and shaft gears. |
Case closed |
Installing the fan & drive |
Cylinder & piston 1 |
Cylinder & piston 2 |
Case with pistons installed |
Cylinders installed |
Cam timing gear drive. |
Cylinder air deflectors & cam drive hsg. installed |
Cam hsg. top view |
Cam Hsg. bottom view |
Laping the valves in the heads |
Cylinder Head with valves installed and titanimn spring seats |
Bottom view of cylinder head |
Setting the valve lash |
Cam hsg with heads ready for instalation side view |
Cam hsg. with heads bottom view |
Installing the Cam hsg and heads on 1 side |
Engine with both cam hsgs. and heads installed botto view |
Engine with both cam hsgs. and heads installed top view |
Engine with distributers,fan,and slides installed |
Installing the oil filter hsg. |
Getting close to finishing |
Gustauv & Armando with COMPLETED 5.0 liter 12 cyl. ready to install into the chassis , ZOOM-ZOOM-ZOOM! |